CITLF2 

Cryogenic SiGe Low Noise Amplifier

LF_Picture_edited.png

Electrical Specifications @ 12 K

                          Description

  • The CITLF2, a SiGe low noise amplifier, is intended for extremely low noise cryogenic applications. The amplifier uses resistive feedback to achieve good input match (S11) and high gain stability. The amplifier is optimum for the frequency range of 0.01 GHz to 2.0 GHz. High gain and low noise is also achieved up to 5 GHz.

 

  • It is powered from a single positive DC power supply which is optimum at 1.8 V, but can be reduced to as low as 1.1 V for low power dissipation. Application of up to 5 V will not damage the amplifier. It is recommended that the power supply for the amplifier to be current limited to 100 mA.

 

  • The amplifier is 20.7 mm x 15.9 mm x 8.7 mm excluding connectors. Input and output female SMA connectors.

                 Optional Input Bias Tee

  • As an option, the amplifier can be supplied with a DC bias tee for an external device connected to the amplifier input. The bias tee is formed by two (2) resistors connected to the input. One (1) resistor can be used as a source of current and the other senses the voltage across the external device. Voltages applied to the bias tee have a small effect on amplifier operation. At 12 K, 20 KΩ resistors increase noise by 0.5 K. To order an amplifier with internal bias resistors, add the resistance to the part #. For instance, CITLF2-20K.

            Optional Input Diode Protection

  • As an option, the amplifier can be supplied with ESD voltage spike protection at the RF input to the amplifier.

Electrical Specifications @ 300 K

imageonline-co-whitebackgroundremoved (4